Choosing color palettes

Color is more important than other aspects of figure style because color can reveal patterns in the data if used effectively or hide those patterns if used poorly. There are a number of great resources to learn about good techniques for using color in visualizations, I am partial to this series of blog posts from Rob Simmon and this more technical paper. The matplotlib docs also now have a nice tutorial that illustrates some of the perceptual properties of the built in colormaps.

Seaborn makes it easy to select and use color palettes that are suited to the kind of data you are working with and the goals you have in visualizing it.

import numpy as np
import seaborn as sns
import matplotlib.pyplot as plt
sns.set()

Building color palettes

The most important function for working with discrete color palettes is color_palette(). This function provides an interface to many (though not all) of the possible ways you can generate colors in seaborn, and it’s used internally by any function that has a palette argument (and in some cases for a color argument when multiple colors are needed).

color_palette() will accept the name of any seaborn palette or matplotlib colormap (except jet, which you should never use). It can also take a list of colors specified in any valid matplotlib format (RGB tuples, hex color codes, or HTML color names). The return value is always a list of RGB tuples.

Finally, calling color_palette() with no arguments will return the current default color cycle.

A corresponding function, set_palette(), takes the same arguments and will set the default color cycle for all plots. You can also use color_palette() in a with statement to temporarily change the default palette (see below).

It is generally not possible to know what kind of color palette or colormap is best for a set of data without knowing about the characteristics of the data. Following that, we’ll break up the different ways to use color_palette() and other seaborn palette functions by the three general kinds of color palettes: qualitative, sequential, and diverging.

Qualitative color palettes

Qualitative (or categorical) palettes are best when you want to distinguish discrete chunks of data that do not have an inherent ordering.

When importing seaborn, the default color cycle is changed to a set of six colors that evoke the standard matplotlib color cycle while aiming to be a bit more pleasing to look at.

current_palette = sns.color_palette()
sns.palplot(current_palette)
../_images/color_palettes_6_0.png

There are six variations of the default theme, called deep, muted, pastel, bright, dark, and colorblind.

../_images/color_palettes_8_0.png

Using circular color systems

When you have an arbitrary number of categories to distinguish without emphasizing any one, the easiest approach is to draw evenly-spaced colors in a circular color space (one where the hue changes while keeping the brightness and saturation constant). This is what most seaborn functions default to when they need to use more colors than are currently set in the default color cycle.

The most common way to do this uses the hls color space, which is a simple transformation of RGB values.

sns.palplot(sns.color_palette("hls", 8))
../_images/color_palettes_10_0.png

There is also the hls_palette() function that lets you control the lightness and saturation of the colors.

sns.palplot(sns.hls_palette(8, l=.3, s=.8))
../_images/color_palettes_12_0.png

However, because of the way the human visual system works, colors that are even “intensity” in terms of their RGB levels won’t necessarily look equally intense. We perceive yellows and greens as relatively brighter and blues as relatively darker, which can be a problem when aiming for uniformity with the hls system.

To remedy this, seaborn provides an interface to the husl system (since renamed to HSLuv), which also makes it easy to select evenly spaced hues while keeping the apparent brightness and saturation much more uniform.

sns.palplot(sns.color_palette("husl", 8))
../_images/color_palettes_14_0.png

There is similarly a function called husl_palette() that provides a more flexible interface to this system.

Using categorical Color Brewer palettes

Another source of visually pleasing categorical palettes comes from the Color Brewer tool (which also has sequential and diverging palettes, as we’ll see below). These also exist as matplotlib colormaps, but they are not handled properly. In seaborn, when you ask for a qualitative Color Brewer palette, you’ll always get the discrete colors, but this means that at a certain point they will begin to cycle.

A nice feature of the Color Brewer website is that it provides some guidance on which palettes are color blind safe. There is a variety of kinds of color blindness, but the most common variant leads to difficulty distinguishing reds and greens. It’s generally a good idea to avoid using red and green for plot elements that need to be discriminated based on color.

sns.palplot(sns.color_palette("Paired"))
../_images/color_palettes_16_0.png
sns.palplot(sns.color_palette("Set2"))
../_images/color_palettes_17_0.png

To help you choose palettes from the Color Brewer library, there is the choose_colorbrewer_palette() function. This function, which must be used in a Jupyter notebook, will launch an interactive widget that lets you browse the various options and tweak their parameters.

Of course, you might just want to use a set of colors you particularly like together. Because color_palette() accepts a list of colors, this is easy to do.

flatui = ["#9b59b6", "#3498db", "#95a5a6", "#e74c3c", "#34495e", "#2ecc71"]
sns.palplot(sns.color_palette(flatui))
../_images/color_palettes_19_0.png

Using named colors from the xkcd color survey

A while back, xkcd ran a crowdsourced effort to name random RGB colors. This produced a set of 954 named colors, which you can now reference in seaborn using the xkcd_rgb dictionary:

plt.plot([0, 1], [0, 1], sns.xkcd_rgb["pale red"], lw=3)
plt.plot([0, 1], [0, 2], sns.xkcd_rgb["medium green"], lw=3)
plt.plot([0, 1], [0, 3], sns.xkcd_rgb["denim blue"], lw=3);
../_images/color_palettes_21_0.png

In addition to pulling out single colors from the xkcd_rgb dictionary, you can also pass a list of names to the xkcd_palette() function.

colors = ["windows blue", "amber", "greyish", "faded green", "dusty purple"]
sns.palplot(sns.xkcd_palette(colors))
../_images/color_palettes_23_0.png

Sequential color palettes

The second major class of color palettes is called “sequential”. This kind of color mapping is appropriate when data range from relatively low or uninteresting values to relatively high or interesting values. Although there are cases where you will want discrete colors in a sequential palette, it’s more common to use them as a colormap in functions like kdeplot() and heatmap() (along with similar matplotlib functions).

It’s common to see colormaps like jet (or other rainbow palettes) used in this case, because the range of hues gives the impression of providing additional information about the data. However, colormaps with large hue shifts tend to introduce discontinuities that don’t exist in the data, and our visual system isn’t able to naturally map the rainbow to quantitative distinctions like “high” or “low”. The result is that these visualizations end up being more like a puzzle, and they obscure patterns in the data rather than revealing them. The jet palette is because the brightest colors, yellow and cyan, are used for intermediate data values. This has the effect of emphasizing uninteresting (and arbitrary) values while deemphasizing the extremes.

For sequential data, it’s better to use palettes that have at most a relatively subtle shift in hue accompanied by a large shift in brightness and saturation. This approach will naturally draw the eye to the relatively important parts of the data.

The Color Brewer library has a great set of these palettes. They’re named after the dominant color (or colors) in the palette.

sns.palplot(sns.color_palette("Blues"))
../_images/color_palettes_25_0.png

Like in matplotlib, if you want the lightness ramp to be reversed, you can add a _r suffix to the palette name.

sns.palplot(sns.color_palette("BuGn_r"))
../_images/color_palettes_27_0.png

Seaborn also adds a trick that allows you to create “dark” palettes, which do not have as wide a dynamic range. This can be useful if you want to map lines or points sequentially, as brighter-colored lines might otherwise be hard to distinguish.

sns.palplot(sns.color_palette("GnBu_d"))
../_images/color_palettes_29_0.png

Remember that you may want to use the choose_colorbrewer_palette() function to play with the various options, and you can set the as_cmap argument to True if you want the return value to be a colormap object that you can pass to seaborn or matplotlib functions.

Sequential “cubehelix” palettes

The cubehelix color palette system makes sequential palettes with a linear increase or decrease in brightness and some variation in hue. This means that the information in your colormap will be preserved when converted to black and white (for printing) or when viewed by a colorblind individual.

Matplotlib has the default cubehelix version built into it:

sns.palplot(sns.color_palette("cubehelix", 8))
../_images/color_palettes_32_0.png

Seaborn adds an interface to the cubehelix system so that you can make a variety of palettes that all have a well-behaved linear brightness ramp.

The default palette returned by the seaborn cubehelix_palette() function is a bit different from the matplotlib default in that it does not rotate as far around the hue wheel or cover as wide a range of intensities. It also reverses the order so that more important values are darker:

sns.palplot(sns.cubehelix_palette(8))
../_images/color_palettes_34_0.png

Other arguments to cubehelix_palette() control how the palette looks. The two main things you’ll change are the start (a value between 0 and 3) and rot, or number of rotations (an arbitrary value, but probably within -1 and 1),

sns.palplot(sns.cubehelix_palette(8, start=.5, rot=-.75))
../_images/color_palettes_36_0.png

You can also control how dark and light the endpoints are and even reverse the ramp:

sns.palplot(sns.cubehelix_palette(8, start=2, rot=0, dark=0, light=.95, reverse=True))
../_images/color_palettes_38_0.png

By default you just get a list of colors, like any other seaborn palette, but you can also return the palette as a colormap object that can be passed to seaborn or matplotlib functions using as_cmap=True.

x, y = np.random.multivariate_normal([0, 0], [[1, -.5], [-.5, 1]], size=300).T
cmap = sns.cubehelix_palette(light=1, as_cmap=True)
sns.kdeplot(x, y, cmap=cmap, shade=True);
../_images/color_palettes_40_0.png

To help select good palettes or colormaps using this system, you can use the choose_cubehelix_palette() function in a notebook to launch an interactive app that will let you play with the different parameters. Pass as_cmap=True if you want the function to return a colormap (rather than a list) for use in function like hexbin.

Custom sequential palettes

For a simpler interface to custom sequential palettes, you can use light_palette() or dark_palette(), which are both seeded with a single color and produce a palette that ramps either from light or dark desaturated values to that color. These functions are also accompanied by the choose_light_palette() and choose_dark_palette() functions that launch interactive widgets to create these palettes.

sns.palplot(sns.light_palette("green"))
../_images/color_palettes_43_0.png
sns.palplot(sns.dark_palette("purple"))
../_images/color_palettes_44_0.png

These palettes can also be reversed.

sns.palplot(sns.light_palette("navy", reverse=True))
../_images/color_palettes_46_0.png

They can also be used to create colormap objects rather than lists of colors.

pal = sns.dark_palette("palegreen", as_cmap=True)
sns.kdeplot(x, y, cmap=pal);
../_images/color_palettes_48_0.png

By default, the input can be any valid matplotlib color. Alternate interpretations are controlled by the input argument. Currently you can provide tuples in hls or husl space along with the default rgb, and you can also seed the palette with any valid xkcd color.

sns.palplot(sns.light_palette((210, 90, 60), input="husl"))
../_images/color_palettes_50_0.png
sns.palplot(sns.dark_palette("muted purple", input="xkcd"))
../_images/color_palettes_51_0.png

Note that the default input space for the interactive palette widgets is husl, which is different from the default for the function itself, but much more useful in this context.

Diverging color palettes

The third class of color palettes is called “diverging”. These are used for data where both large low and high values are interesting. There is also usually a well-defined midpoint in the data. For instance, if you are plotting changes in temperature from some baseline timepoint, it is best to use a diverging colormap to show areas with relative decreases and areas with relative increases.

The rules for choosing good diverging palettes are similar to good sequential palettes, except now you want to have two relatively subtle hue shifts from distinct starting hues that meet in an under-emphasized color at the midpoint. It’s also important that the starting values are of similar brightness and saturation.

It’s also important to emphasize here that using red and green should be avoided, as a substantial population of potential viewers will be unable to distinguish them.

It should not surprise you that the Color Brewer library comes with a set of well-chosen diverging colormaps.

sns.palplot(sns.color_palette("BrBG", 7))
../_images/color_palettes_54_0.png
sns.palplot(sns.color_palette("RdBu_r", 7))
../_images/color_palettes_55_0.png

Another good choice that is built into matplotlib is the coolwarm palette. Note that this colormap has less contrast between the middle values and the extremes.

sns.palplot(sns.color_palette("coolwarm", 7))
../_images/color_palettes_57_0.png

Custom diverging palettes

You can also use the seaborn function diverging_palette() to create a custom colormap for diverging data. (Naturally there is also a companion interactive widget, choose_diverging_palette()). This function makes diverging palettes using the husl color system. You pass it two hues (in degrees) and, optionally, the lightness and saturation values for the extremes. Using husl means that the extreme values, and the resulting ramps to the midpoint, will be well-balanced.

sns.palplot(sns.diverging_palette(220, 20, n=7))
../_images/color_palettes_59_0.png
sns.palplot(sns.diverging_palette(145, 280, s=85, l=25, n=7))
../_images/color_palettes_60_0.png

The sep argument controls the width of the separation between the two ramps in the middle region of the palette.

sns.palplot(sns.diverging_palette(10, 220, sep=80, n=7))
../_images/color_palettes_62_0.png

It’s also possible to make a palette with the midpoint is dark rather than light.

sns.palplot(sns.diverging_palette(255, 133, l=60, n=7, center="dark"))
../_images/color_palettes_64_0.png

Setting the default color palette

The color_palette() function has a companion called set_palette(). The relationship between them is similar to the pairs covered in the aesthetics tutorial. set_palette() accepts the same arguments as color_palette(), but it changes the default matplotlib parameters so that the palette is used for all plots.

def sinplot(flip=1):
    x = np.linspace(0, 14, 100)
    for i in range(1, 7):
        plt.plot(x, np.sin(x + i * .5) * (7 - i) * flip)
sns.set_palette("husl")
sinplot()
../_images/color_palettes_67_0.png

The color_palette() function can also be used in a with statement to temporarily change the color palette.

with sns.color_palette("PuBuGn_d"):
    sinplot()
../_images/color_palettes_69_0.png